Displaying And Maintaining Portal; Portal Configuration Examples; Configuring Direct Portal Authentication - HPE FlexNetwork 5510 HI Series Security Configuration Manual

Step
2. Create a local portal Web
server and enter its view.
3. Specify
authentication page file for
the local portal Web server.
4. (Optional.)
listening TCP port for the
local portal Web server.

Displaying and maintaining portal

Execute display commands in any view and the reset command in user view.
Task
Display portal rules on an interface.
Display portal configuration and portal running state
information on an interface.
Display portal authentication server information.
Display portal Web server information.
Display packet statistics for portal authentication
servers.
Display portal user information.
Clear packet statistics for portal authentication
servers.

Portal configuration examples

Configuring direct portal authentication

Network requirements
As shown in
assigned with a public IP address either manually or through DHCP. A portal server acts as both a
portal authentication server and a portal Web server. A RADIUS server acts as the
authentication/accounting server.
Configure direct portal authentication, so the host can access only the portal server before passing
the authentication and access other network resources after passing the authentication.
Command
portal local-web-server { http |
https
policy-name
port-number ] }
the default
default-logon-page filename
Configure the
tcp-port port-number
Figure 42, the host is directly connected to the switch (the access device). The host is
ssl-server-policy
[ tcp-port
Command
display portal rule { all | dynamic | static }
interface interface-type interface-number [ slot
slot-id ]
display portal
interface-number
display portal server [ server-name ]
display portal web-server [ server-name ]
display portal
server-name ]
display portal user { all | interface interface-type
interface-number }
reset portal
server-name ]
145
Remarks
By default, no local portal Web
servers exist.
By default, no
authentication page
specified for the local portal Web
server.
By default, the HTTP service
listening port number is 80 and the
HTTPS service listening
number is the TCP port number
set by the
local-web-server command.
interface interface-type
packet statistics [
packet statistics [
default
file is
port
portal
server
server