Referencing A Portal Web Server For An Interface; Controlling Portal User Access; Configuring A Portal-Free Rule - HPE FlexNetwork 5510 HI Series Security Configuration Manual

Hide thumbs Also See for FlexNetwork 5510 HI Series:
Table of Contents

Advertisement

Step
on the interface.

Referencing a portal Web server for an interface

After you reference a portal Web server for an interface, the device redirects the HTTP requests of
the portal users on the interface to the portal Web server.
An interface can reference both an IPv4 portal Web server and an IPv6 portal Web server.
To reference a portal Web server for an interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Reference a portal
Web server for the
interface.

Controlling portal user access

Configuring a portal-free rule

A portal-free rule allows specified users to access specified external websites without portal
authentication.
The matching items for a portal-free rule include the source/destination IP address, TCP/UDP port
number, source MAC address, access interface, and VLAN. Packets matching a portal-free rule will
not trigger portal authentication, so users sending the packets can directly access the specified
external websites.
You cannot configure two or more portal-free rules with the same filtering criteria. Otherwise, the
system prompts that the rule already exists.
Regardless of whether portal authentication is enabled or not, you can only add or remove a
portal-free rule. You cannot modify it.
To configure an IP-based portal-free rule:
Step
1.
Enter system view.
Command
authentication:
portal enable method { direct |
layer3 | redhcp }
To
enable
authentication:
portal
ipv6
{ direct | layer3 }
Command
system-view
interface interface-type interface-number
To reference an IPv4 portal Web server:
portal apply web-server server-name
[ fail-permit ]
To reference an IPv6 portal Web server:
portal
ipv6
apply
server-name [ fail-permit ]
Command
system-view
132
Remarks
authentication, IPv6 portal
authentication, or both on the
interface.
IPv6
portal
enable
method
Remarks
N/A
The interface must be a Layer
3 interface.
Reference an IPv4 portal Web
server, an IPv6 portal Web
server,
interface.
By default, the interface does
web-server
not reference any portal Web
server.
Remarks
N/A
or
both
for
the

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FlexNetwork 5510 HI Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF