Configuring Accounting Methods For An Isp Domain - HPE FlexNetwork 5510 HI Series Security Configuration Manual

Configuring accounting methods for an ISP domain

Configuration prerequisites
Before configuring accounting methods, complete the following tasks:
1. Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type.
2. Determine whether to configure the default accounting method for all access types or service
types. The default accounting method applies to all access users. However, the method has a
lower priority than the accounting method that is specified for an access type or service type.
Configuration guidelines
When configuring accounting methods, follow these guidelines:
•
FTP, SFTP, and SCP users do not support accounting.
•
Local accounting does not provide statistics for charging. It only counts and controls the number
of concurrent users who use the same local user account. The threshold is configured by using
the access-limit command.
Configuration procedure
To configure accounting methods for an ISP domain:
Step
1. Enter system view.
2. Enter ISP domain view.
3. Specify
accounting method for all
types of users.
4. Specify
accounting method.
5. Specify
method for LAN users.
6. Specify
method for login users.
7. Specify
method for portal users.
Command
system-view
domain isp-name
accounting default { hwtacacs-scheme
hwtacacs-scheme-name
[ radius-scheme radius-scheme-name ]
the default
[ local ] [ none ] | local [ none ] | none |
radius-scheme
[
hwtacacs-scheme-name
[ none ] }
accounting
the command
hwtacacs-scheme
hwtacacs-scheme-name
accounting lan-access { local [ none ] |
the accounting
none
radius-scheme-name [ local ] [ none ] }
accounting login { hwtacacs-scheme
hwtacacs-scheme-name
[ radius-scheme radius-scheme-name ]
the accounting
[ local ] [ none ] | local [ none ] | none |
radius-scheme
[
hwtacacs-scheme-name
[ none ] }
accounting portal { local [ none ] | none |
the accounting
radius-scheme
[ local ] [ none ] }
radius-scheme-name
hwtacacs-scheme
local
] [
command
| radius-scheme
radius-scheme-name
hwtacacs-scheme
] [ local
radius-scheme-name
47
Remarks
N/A
N/A
By default, the accounting
method is local.
The none keyword is not
supported in FIPS mode.
]
By default, the default
accounting method is used
for command accounting.
By default, the default
accounting method is used
for LAN users.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for login users.
The none keyword is not
supported in FIPS mode.
]
By default, the default
accounting method is used
for portal users.
The none keyword is not
supported in FIPS mode.