Overview; Purpose And Scope - Welch Allyn Connex Service Manual

Overview

Purpose and scope

This manual is a reference for periodic preventive maintenance and corrective service
procedures for the Welch Allyn Connex Integrated Wall System, firmware version 2.3X.
It is intended for use only by trained and qualified service personnel.
Corrective service is supported to the level of field-replaceable units. These include
circuit-board assemblies and some subassemblies, case parts, and other parts.
Find instructions for functional testing and performance verification in the Welch Allyn
Service Tool help files.
This manual applies only to this device. For servicing of any other device, see the service
manual for the specific device.
Service work not described in this manual must be performed by qualified service
personnel at the factory or at an authorized Welch Allyn service center.
Related documents
When using this manual, refer to the following:
• Welch Allyn Connex® Devices Directions for use, Software version 2.3X
(on the user documentation CD)
• Welch Allyn Service Tool
http://www.welchallyn.com/en/service-support/service-center/service-tool.html
• Welch Allyn Service Tool Installation and configuration guide
http://www.welchallyn.com/en/service-support/service-center/service-tool.html
• Welch Allyn Braun ThermoScan® PRO 6000 Ear Thermometer, Service manual
(80020325)
• Welch Allyn 9600 Plus Calibration Tester Directions for use
• Welch Allyn Radio Configuration guide
• Welch Allyn website:
CAUTION No component-level repair of circuit boards and subassemblies
is supported. Use only the repair procedures described in this manual.
WARNING When performing a service procedure, follow the instructions
exactly as presented in this manual. Failure to do so could damage the
device, invalidate the product warranty, and cause serious personal injury.
click here to download the PDF
www.welchallyn.com
click here to download the PDF
9