Overview; Purpose And Scope - Welch Allyn Connex 6000 Series Service Manual

Overview

Purpose and scope

This service manual is a reference for periodic preventive maintenance and corrective
service procedures for the Welch Allyn Connex Vital Signs Monitor 6000 Series,
firmware version 2.0X. It is intended for use only by trained and qualified service
personnel.
Corrective service is supported to the level of field-replaceable units. These include
circuit-board assemblies and some subassemblies, case parts, and other parts.
Find instructions for functional testing and performance verification in the Welch Allyn
Service Tool help files.
This manual applies only to this device. For servicing of any other vital signs monitor, see
the service manual for the specific device.
Service work not described in this manual must be performed by qualified service
personnel at the factory or at an authorized Welch Allyn service center.
Related documents
When using this manual, refer to the following:
• Welch Allyn Connex Vital Signs Monitor 6000 Series Directions for use, software
version 2.0X (on the user documentation CD, part number 104730)
• Welch Allyn Connex Vital Signs Monitor 6000 Series accessories list (on the user
documentation CD, part number 104730)
• Welch Allyn Service Tool CD (part number 103521)
• Welch Allyn Service Tool Installation and Configuration Guide (part number 103820)
• Welch Allyn Braun PRO 4000 Service Manual (part number 701627)
• Welch Allyn 9600 Plus Calibration Tester Directions for use (part number 701754)
• Welch Allyn Radio Configuration Guide:
CAUTION No component-level repair of circuit boards and subassemblies
is supported. Use only the repair procedures described in this manual.
WARNING When performing a service procedure, follow the instructions
exactly as presented in this manual. Failure to do so could damage the
monitor, invalidate the product warranty, and lead to serious personal
injury.
click here to download the PDF
9