Parameter
Off Hook Key List
Dialing Input Key List
Progressing Key List
Connected Key List
Start-Xfer Key List
Start-Conf Key List
Conferencing Key List
Releasing Key List
Hold Key List
Ringing Key List
Shared Active Key List
Shared Held Key List
PSK 1 through PSK 16
User
Hold Reminder
Parameter
Hold Reminder Timer
Hold Reminder Ringtone
Call Forward
Parameter
Cfwd Setting
Description
Softkeys that display when the phone is off-hook.
Softkeys that display when the user must enter dialing data.
Softkeys that display when a call is attempting to connect.
Softkeys that display when a call is connected.
Softkeys that display when a call transfer has been initiated.
Softkeys that display when a conference call has been initiated.
Softkeys that display when a conference call is in progress.
Softkeys that display when a call is released.
Softkeys that display when one or more calls are on hold.
Softkeys that display when a call is incoming.
Softkeys that display when a call is active on a shared line.
Softkeys that display when a call is on hold on a shared line.
Programmable softkey fields. Enter a string in these fields to configure
softkeys that display on the phone screen. You can create softkeys for
speed dials to numbers or extensions, vertical service activation codes
(* codes), or XML scripts.
Description
Specifies the time delay (in seconds), that a ring splash is heard on an
active call when another call was placed on hold.
Default: 0
Specifies the volume of the timer ringtone.
Description
Select Yes to enable call forwarding.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Cisco IP Phone Web Page
191