Configure Busy Lamp Field With Other Features; Configure The Busy Lamp Field For A Single Phone With The Configuration Utility - Cisco IP Phone 6851 Administration Manual

Configure Busy Lamp Field with Other Features

Configure the Busy Lamp Field for a Single Phone with the Configuration Utility

You can configure busy lamp field on a phone line when a user needs to monitor a coworker's availability to
handle calls.
You can configure the busy lamp field to work with any combination of speed dial or call pickup. For example,
busy lamp field alone, busy lamp field and speed dial, busy lamp field and call pickup, or busy lamp field,
speed dial, and call pickup can all be configured to work together. But speed dial alone requires a different
configuration.
Procedure
Step 1 On the Configuration Utility page, select Admin Login > advanced > Voice > Phone.
Step 2 Select a line key on which to configure a busy lamp field.
Step 3
Select Disabled to disable the extension.
Step 4 In the Extended Function field, enter a string in this format:
fnc=blf;sub=xxxx@$PROXY;usr=yyyy@$PROXY
fnc=blf;sub=xxxx@$PROXY;ext=yyyy@$PROXY
Where:
• fnc= blf means function=busy lamp field
• sub= the URI to which the SUBSCRIBE message should be sent. For a BroadSoft server, this name
• usr/ext= the user that the busy lamp field monitors. yyyy is user id of the phone that the busy lamp field
Step 5 (Optional) You can configure the busy lamp field to work with any combination of speed dial or call pickup.
To enable the busy lamp field to work with speed dial or call pickup, enter a string in the following format in
the Extended Function field:
fnc=blf+sd+cp;sub=xxxx@$PROXY;usr=yyyy@$PROXY
Where:
sd= speed dial
cp= call pickup
Step 6
Click Submit All Changes.
Configure Busy Lamp Field with Other Features
You can configure busy lamp field to work with other features on your key expansion module, such as speed
dial, and call pickup. Use the information in the following table as a guide when selecting the correct string
format.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
112
must be identical to the name defined in the List URI: sip: parameter. xxxx is the name that is defined
in List URI: sip: parameter. Replace xxxx with the exact defined name. $PROXY is the server. Replace
$PROXY with the server address or name.
monitors. Replace yyyy with the exact user id of the monitored phone. $PROXY is the server. Replace
$PROXY with the server address or name.
.