Cisco Ip Phone 6800 Series Multiplatform Phones Administration Guide - Cisco IP Phone 6851 Administration Manual

Cisco IP Phone Web Page
Parameter
Auth Resync-Reboot
SIP Proxy-Require
SIP Remote-Party-ID
Referor Bye Delay
Refer-To Target Contact
Referee Bye Delay
Refer Target Bye Delay
Sticky 183

Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide

196
Description
The Cisco IP Phone authenticates the sender when it receives a NOTIFY
message with the following requests:
• resync
• reboot
• report
• restart
• XML-service
Select Yes to enable.
Default: Yes
The SIP proxy can support a specific extension or behavior when it sees
this header from the user agent. If this field is configured and the proxy
does not support it, it responds with the message, unsupported. Enter
the appropriate header in the field provided.
The Remote-Party-ID header to use instead of the From header. Select
Yes to enable.
Default: Yes
Controls when the phone sends BYE to terminate stale call legs upon
completion of call transfers. Multiple delay settings (Referor, Refer
Target, Referee, and Refer-To Target) are configured on this screen.
For the Referror Bye Delay, enter the appropriate period of time in
seconds.
Default: 4
Indicates the refer-to target. Select Yes to send the SIP Refer to the
contact.
Default: No
For the Referee Bye Delay, enter the appropriate period of time in
seconds.
Default: 0
For the Refer Target Bye Delay, enter the appropriate period of time in
seconds.
Default: 0
When enabled, the IP telephony ignores further 180 SIP responses after
receiving the first 183 SIP response for an outbound INVITE. To enable
this feature, select Yes. Otherwise, select No.
Default: No