Chassis Id Tlv - Cisco IP Phone 6851 Administration Manual

Ip phone 6800 series multiplatform phone
Table of Contents

Advertisement

VLAN Settings

• Chassis ID TLV

• Port ID TLV
• Time to live TLV
• End of LLDPDU TLV
There are some restrictions in the implementation of LLDP-MED on the Cisco IP Phones:
• Storage and retrieval of neighbor information are not supported.
• SNMP and corresponding MIBs are not supported.
• Recording and retrieval of statistical counters are not supported.
• Full validation of all TLVs does not take place; TLVs that do not apply to the phones are ignored.
• Protocol state machines as stated in the standards are used only for reference.
Chassis ID TLV
For the outgoing LLDPDU, the TLV supports subtype=5 (Network Address). When the IP address is known,
the value of the Chassis ID is an octet of the INAN address family number followed by the octet string for
the IPv4 address used for voice communication. If the IP address is unknown, the value for the Chassis ID is
0.0.0.0
not supported.
For the incoming LLDPDU, the Chassis ID is treated as an opaque value to form the MSAP identifier. The
value is not validated against its subtype.
The Chassis ID TLV is mandatory as the first TLV. Only one Chassis ID TLV is allowed for the outgoing
and incoming LLDPDUs.
Port ID TLV
For the outgoing LLDPDU, the TLV supports subtype=3 (MAC address). The 6 octet MAC address for the
Ethernet port is used for the value of Port ID.
For the incoming LLDPDU, the Port ID TLV is treated as an opaque value to form the MSAP identifier. The
value is not validated against its subtype.
The Port ID TLV is mandatory as the second TLV. Only one Port ID TLV is allowed for the outgoing and
incoming LLDPDUs.
Time to Live TLV
For the outgoing LLDPDU, the Time to Live TTL value is 180 seconds. This differs from the 120-second
value that the standard recommends. For the shutdown LLDPDU, the TTL value is always 0.
The Time to Live TLV is mandatory as the third TLV. Only one Time to Live TLV is allowed for the outgoing
and incoming LLDPDUs.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
34
. The only INAN address family supported is IPv4. Currently, the IPv6 address for the Chassis ID is

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ip phone 6841

Table of Contents