Call Park - Cisco IP Phone 6851 Administration Manual

• When multiple pages occur, the pages are answered in chronological order. Until the active page ends,
Procedure
Step 1 On the Configuration Utility page, select Admin Login > Advanced > Voice > Phone.
Step 2 In the Multiple Paging Group Parameters section, enter a string in the Group Paging Script field in this
format:
pggrp=multicast-address:port;[name=xxxx;]num=yyy;[listen={yes|no}]];
where:
• multicast-address = Multicast IP address of the phone that listens for and receives pages.
• port = Port on which to page; you must use different ports for each paging group.
• name (optional) = xxxx is the name of the paging group. Replace xxxx with a name. The name can
• num= yyy is a unique number that the user dials to access the paging group. Replace yyy with a number.
• listen = Indicates whether the phone listens on the page group. Only the first two groups with listen set
You can add more paging groups by appending to the configuration string. Here is an example.
pggrp=224.168.168.168:34560;name=All;num=500;listen=yes;
pggrp=224.168.168.168:34562;name=GroupA;num=501;listen=yes;
pggrp=224.168.168.168:34564;name=GroupB;num=502;
pggrp=224.168.168.168:34566;name=GroupC;num=503;
This example creates four paging groups: All, GroupA, GroupB, and GroupC. Users dial 500 to send pages
to all phones, 501 to send pages to phones configured as part of the GroupA group, 502 to send pages to
phones configured as part of the GroupB group, and 503 to send pages to phones configured as part of the
GroupC group. The configured phone receives pages directed to the groups All and GroupA.
Step 3
Click Submit All Changes.

Call Park

With call park, a call can be parked and then retrieved either from your phone or from another phone. The
following LED colors display on the line key when this feature is configured:
• Green LED—Call park is successfully configured.
• Amber LED—Call park is not configured.
• Red slow blinking LED—A call is parked.
the next page is not answered.
consist maximum of 64 characters.
The number can consist maximum of 64 characters and the allowed range is 1024 to 32767.
to yes listen to group pages. If the field is not defined, the default value is no, so you must set this field
to listen to the group pages.
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
Call Park
115