Changing Customer Setting - Key Layout With Display (Optional) - Bosch SPS40C12GB Repair Instructions

Repairs
6.19 Changing customer setting - Key layout with
display (optional)
The panels and setting options differ depending on the appliance
model.
recruitment Display
Water hardness H:00 - H:07
Intensive drying d:00 - d:01
Rinsing r:00 – r:06
Auto Power Off P:01 - P:02
Table 5: Overview of customer settings
Prerequisite:
• Appliance is switched on.
• No program has been started. No timer programming is activated (Perform
reset + press "Off/On" button).
• Appliance door is closed.
2016-03-02 / DIS 840_58300000176874_ara_en_c
Value range Factory settings
8 ranges H:04
Switching on and d:00
off
Switching on and r:05
off
P:00 (off) P:01
P:01
(off after 1 min)
P:02
(off after 120 min)
Copyright by BSH Hausgeräte GmbH
6.19.1 Key layout with display
Fig. 5: Control panel - vertical display
Fig. 6: Control panel - horizontal display
1. Press and hold down the "Start" button B.
2. Turn the rotary selector switch C until the required setting is shown in the
display.
3. Release the Start" button B.
4. Turn the rotary selector switch C until the required value is shown in the
display.
6.19.2 Storing the settings
► The settings are stored by pressing the "Start" button B.
Page 85 of 157