Replacing Hinges - Bosch SPS40C12GB Repair Instructions

Repairs
6.32

Replacing hinges

Prerequisite:
• Appliance is disconnected from the power supply.
• Outer door has been removed.
• Base socket plate has been removed.
• Toe panel has been removed (optional).
• Door springs have been removed.
• Fascia panel has been removed.
• Cable harness holder in the lower right area has been removed.
• Overflow conduit has been loosened.
6.32.1 Removing hinges
1. Loosen the catch tappets with a screwdriver (1) and pull out the door upwards
together with the hinges (2).
2016-03-02 / DIS 840_58300000176874_ara_en_c
.
3. On the dismantled door, remove 2 screws from each hinge to take it off.
6.32.2 Installing hinges
1. Push the door seal on to the lower edge of the inner door.
Copyright by BSH Hausgeräte GmbH
The lower door seal is also removed.
Page 113 of 157