Bosch SPS40C12GB Repair Instructions page 92

Repairs
4. Disengage the power module (1) and remove it upwards out of the appliance.
2016-03-02 / DIS 840_58300000176874_ara_en_c
6.23.2 Installing the power module
1. Insert the power module into the basis carrier along the rear panel wall and
lock into position.
2. Insert the coding frames into the guide and press downwards until you hear the
catch mechanism lock into position. Ensure that the plug contacts are firmly
positioned in the coding frame.
3. Route the cables.
Copyright by BSH Hausgeräte GmbH Page 92 of 157