Replacing The Low Salt Sensor (Optional) - Bosch SPS40C12GB Repair Instructions

Repairs
6.31

Replacing the low salt sensor (optional)

The low salt sensor is situated in the lower area of the water-
softening system.
Prerequisite:
Retaining flap on the back wall has been opened.
6.31.1 Removing the low salt sensor
1. Disconnect plug connection of the sensor.
2. Remove the PCB of the low salt sensor from the holder in the water-softening
system with a nipper pliers (1).
2016-03-02 / DIS 840_58300000176874_ara_en_c
6.31.2 Installing the low salt sensor
► Install the low salt sensor in reverse order.
Copyright by BSH Hausgeräte GmbH Page 112 of 157