Bosch SPS40C12GB Repair Instructions page 143

Repairs
2. Adjust the sensor plate of the door opening module before installation.
3. Position the door opening on to the door lock from the top and click into place.
2016-03-02 / DIS 840_58300000176874_ara_en_c
6.44.4 Reset
.
2. Shut the door with increased force.
Result:
The spring lock of the door lock works normally again.
Copyright by BSH Hausgeräte GmbH
In order to remove the door opening module, the door lock
must be manually locked.
After the door opening module has been fitted, the door lock
must be unlocked again.
Page 143 of 157