Replacing The Door Sensor - Bosch SPS40C12GB Repair Instructions

Repairs
6.46

Replacing the door sensor

The door sensor is situated in the upper area of the inner door.
Prerequisite:
• Appliance is disconnected from the power supply.
• furniture panel has been removed (optional).
• Outer door has been removed
• Fascia panel has been removed.
6.46.1 Removing the door sensor with the closure recess
1. Remove 2 screws (1) and take out the door sensor with the closure recess (2).
2016-03-02 / DIS 840_58300000176874_ara_en_c
2. Release the electrical connection (1) and unplug it (2).
6.46.2 Installing the door sensor with the closure recess
► Install the door sensor in reverse order.
Copyright by BSH Hausgeräte GmbH Page 146 of 157