Scraping Noises - Bosch SPS40C12GB Repair Instructions

Fault diagnosis
Fault

Scraping noises

2016-03-02 / DIS 840_58300000176874_ara_en_c
Possible cause
When water sprayed from the lower bas-
ket encounters the upper spray arm it can
(when partly loaded) make it rotate un-
evenly or hit the upper basket.
When opening or closing the door, the
shock absorber or gliders scrape against
the bottom group.
Copyright by BSH Hausgeräte GmbH
Troubleshooting
- If the appliance is only partly loaded, arrange the utensils to cover the area.
► Lay some plates horizontally in the lower basket. The noise should stop.
- Position the gliders correctly in the bottom group. The shock absorber can be
removed after transport.
► Replace the defective door spring.
Page 23 of 157