Bosch SPS40C12GB Repair Instructions page 52

Repairs
1. Release the retainer plate (1). Fold down the retaining flap (2). Press the
drainage hose out of the holder (3).
2. Pull the drain hose out of the connection to the water inlet system / heat
exchanger (1). Then press the drain hose into the inside of the appliance (2).
2016-03-02 / DIS 840_58300000176874_ara_en_c
3. Pull the drain hose out towards the back of the appliance.
6.1.3 Installing the drain hose
Leakage due to incorrect installation!
► Ensure that the drain hose does not twist during installation.
1. Install the drainage hose in reverse order.
2. Check the tightness.
Copyright by BSH Hausgeräte GmbH Page 52 of 157