Replacing The Fascia Panel - Bosch SPS40C12GB Repair Instructions

Repairs
6.8

Replacing the fascia panel

If the control module is defective the entire fascial panel must be
replaced.
Prerequisite:
• Appliance is disconnected from the power supply.
• furniture panel has been removed (optional).
• Outer door has been removed.
6.8.1 Installing the fascia panel
1. Disconnect electrical connections on the fascia panel and the low rinse aid
sensor (1, 2).
2016-03-02 / DIS 840_58300000176874_ara_en_c
2. Disconnect the ground cable (3) (optional).
3. Open the appliance door.
4. Secure the fascia panel against falling down (hold on to it).
5. Remove six screws.
6. Remove the fascia panel.
6.8.2 Installing the fascia panel
► Install the fascia in reverse order.
Copyright by BSH Hausgeräte GmbH Page 64 of 157