Test
4. 0 If the resistance does not agree with the value given in the circuit diagram
►
replace the defective door sensor (Page 44)
5. 0 If the resistance does agree with the value given in the circuit diagram
► check the line resistance R at the plug-in connections.
2016-03-02 / DIS 840_58300000176874_ara_en_c
6. 0 If the line or plug-in connection is interrupted (R > 0 to infinity)
► replace the defective cable harness.
7. 0 If the line is intact (R = 0)
►
replace the defective power module. (Page 44)
Copyright by BSH Hausgeräte GmbH
Page 44 of 157