Bosch SPS40C12GB Repair Instructions page 100

Repairs
Fig. 12: Distance for installation of the furniture panel
b Distance from the top edge of the adjacent
front to the clamping screw of the sliding
element
1. Align the appliance correctly to the mounting height.
2. Ensure that the measurements b and c match.
6.25.5 Installing the cabinet panel (with variable hinges)
From the FD 9205, there is a new system for securing the sliding
elements.
.
Wrong position of the fastening screws!
Destruction of the retaining or sliding elements on the joints
► Before attaching the furniture panel, fix the screw so far out of the sliding
element so that the gap in the sliding element is free.
2016-03-02 / DIS 840_58300000176874_ara_en_c
c Distance from the top edge of the furniture
panel to the middle of the retaining element
Copyright by BSH Hausgeräte GmbH
2. Secure the furniture panel together with the variable hinges with two screws to
the outer door.
3. Position the retaining element (2) in the sliding element (1) so that the screw is
in the middle of the recess. Do not tighten the screw.
Page 100 of 157