Changing Customer Setting - Key Layout Without Display (Optional) - Bosch SPS40C12GB Repair Instructions

Hide thumbs Also See for SPS40C12GB:
Table of Contents

Advertisement

Repairs
6.20
Changing customer setting - Key layout
without display (optional)
The panels and setting options differ depending on the appliance
model.
Prerequisite:
Appliance is switched on.
No program has been started. No timer programming is activated (Perform
reset + press "Off/On" button).
Appliance door is closed.
6.20.1
Key layout without display
Fig. 7:
Control panel - vertical key layout
Fig. 8:
Control panel - horizontal key layout
2016-03-02 / DIS 840_58300000176874_ara_en_c
6.20.2
Adjust rinsing volume
1. Hold down the "Start" button B.
2. Turn the programme selector C until the Low rinsing product indicator flashes.
3. Release the Start" button B. (The current setting is displayed, see Table 7)
4. To change the settings, turn the program selector until the required value is
shown in the display.
6.20.3
Selecting intensive drying
1. Hold down the "Start" button B.
2. Turn the program selector C until the "Water inflow" indicator flashes.
3. Release the "Start" button B (The current setting is displayed (On/Off).
4. To change the settings, turn the program selector Cuntil the required value is
displayed.
.
6.20.4
Storing the settings
► The settings are stored by pressing the "Start" button B.
6.20.5
Setting the water hardness
1. Hold down the button B.
2. Additionally press the "Start" button D until the display and the Low salt
indicator flash.
3. Release the buttons. (The Low salt indicator flashes and the current setting is
displayed).
4. To change the setting, press the button B until the required value is displayed.
Copyright by BSH Hausgeräte GmbH
"Auto Power Off" is an optional appliance function and cannot
be changed. The factory setting is 1 minute.
Page 87 of 157

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents