Repairs; Replacing The Drain Hose - Bosch SPS40C12GB Repair Instructions

Repairs

6.1

Replacing the drain hose

The drain hose is installed in the lower area at the back of the
appliance.
Prerequisite:
• Appliance is freely accessible.
• Appliance is disconnected from the power supply.
• Appliance has been emptied.
• Left side panel has been removed.
6.1.1 Removing the drainage hose (appliance with
AquaStop)
1. Release the retainer plate (1). Fold down the retaining flap (2). Press the
drainage hose out of the holder (3).
2016-03-02 / DIS 840_58300000176874_ara_en_c
2. Pull the drain hose out of the connection to the water inlet system / heat
exchanger (1). Then press the drain hose into the inside of the appliance (2).
3. Pull the drain hose out towards the back of the appliance.
6.1.2 Removing the drain hose (appliance with inlet valve)
Prerequisite:
Inlet hose has been removed.
Copyright by BSH Hausgeräte GmbH Page 51 of 157