Changing Customer Settings (Codings) - Bosch SHEM63W55N Repair Manual

Repair

6.33 Changing customer settings (codings)

Dishwasher settings can be changed on the fascia panel and stored in memory until
changed again.
¡
Displays only show features available for the model you're working on - if some
features shown below don't appear, they aren't available on your model.
¡
Dishwashers have been preset with default settings for customer convenience.
Settings can be changed as desired using the procedure below or reset to factory
defaults.
Prerequisite:
Dishwasher has been turned off and no wash programs are running
1. Press "On / Off" button to turn the dishwasher on.
2. While pressing and holding "A" button, press and hold "Start" button for ~ 3
seconds until display shows "r:0x" or "d:0x" ("x" can be any # from 0 – 6), then re-
lease both buttons.
Button "A" will be flashing.
3. To choose settings to change, press button "A" repeatedly to scroll through avail-
able settings (see setting chart below).
Setting (coding) Selections
Rinse-aid r:00
Extra Dry d:00
Auto Power Off P:00
Button "A" will be flashing.
2020-04-24_58300000218396_ara_en_c
Descriptions / Defaults
- r:06 6 settings & no rinse-aid
(default: r:05, 5 ml). With
no rinse aid, wash cycles
default to longest time
with most washes and
rinses.
- d:01 On or off (default:
Off)
¡
- P:02 P:00 = Dishwasher
doesn't turn off (de-
fault w/o display)
¡
P:01 = Dishwasher
turns off after 1
minute (default w/
display)
¡
P:02 = Dishwasher
turns off after 2 hours
4. To change your setting, press button "C" repeatedly to scroll through setting
choices.
5. To choose other settings to change, press button "A" to scroll through available
settings as before. Press button "C" repeatedly to scroll through setting choices.
6. To save all of your settings, press "Start" button for ~ 3 seconds.
d:00 =
Copyright by BSH Hausgeräte GmbH Page 126 of 126