Turn The Projector On - Canon WUX500ST Quick Start Manual

Turn the Projector On

1
Check the connection between the projector and the computer or AV
equipment.
2
Press the POWER button.
The [POWER ON] indicator initially flashes green, after which it remains lit.
Remote control
The countdown window is displayed for approximately 20 seconds, and then
the projection is started. Press the OK or EXIT button to hide the countdown
window.
• Network functions are not available for the first 40 seconds after startup.
• A window appears when the projector is turned on for the first time. You can select a
language to be used by the projector for displaying menus and messages in the
window. Select the desired language with the pointer buttons and press the OK button.
You can change the language from the menu at a later time.
3
Turn on the computer or AV equipment power.
Changing Operations When Projector is Turned On
You can change operations when the projector is turned on as follows.
• You can turn on the projector by connecting the power cord, without
pressing the POWER button.
• You can change the countdown window.
• You can skip the countdown window.
When the Projector Is Left Idle
If no signal is received, the power management feature automatically turns off
the projector after a certain period of inactivity (by default, 15 minutes).
Projector
40