Led Indicator Displays - Canon WUX500 User Manual

Before Use

■ LED Indicator Displays

The LED indicators flash or illuminate to indicate the operating status of the
projector.
Legend: Example of when the POWER ON indicator is on;
LED indicator
POWER
WARNING
ON
(red)
(green)
• A flashing LAMP indicator means that it is almost time to replace
the lamp. Prepare a replacement lamp.
• Lamps that are still used after the timing for lamp replacement are
more likely to rupture. Replace the lamp with a new one as soon
as possible.
LAMP TEMP
(orange) (red)
A projector is not plugged in.
Power is on.
A projector is in standby mode (blinks slowly:
every 4 seconds).
Waking from or entering standby mode (blinks:
every second).
The time for replacing the lamp is near. (In standby
mode.)
The time for replacing the lamp is near. (During
projection)
Internal temperature is high.
A lamp error has occurred.
A temperature error has occurred.
The lamp cover is open.
Another error has occurred.
30
: Off : Lit : Flashing
Operating status