Table of Contents
Advertisement
2.5) Repair
DANGER
2.6) Safety Label Type
CAUTION
경 고
Do not operate without finger guard and
safety devices. Before threading, changing
bobbin and needle, cleaning etc. switch off
main switch.
손가락 보호대와 안전장치 없이 작동하지
마십시오.
실, 보빈, 바늘교환시나 청소전에는 반드시
주전원의 스위치를 꺼 주십시오.
WARNING
Injury may be caused by winding.
Be sure to turn off the power
before cleaning, lubricating,
adjusting or repairing.
8
When repair is needed, it should be made by a designated A/S technician only who is
trained in our company.
1) In order to maintain machine such as cleaning and repair, make sure to block main
power and wait for four minutes during which electricity is completely discharged.
Wait for ten minutes for main shaft motor and X/Y drive box to
be completely discharged after main power is blocked.
CAUTION
2) Don't change specification or parts without consultation with our company otherwise
safety is threatened during operation.
3) Use SWF pure authentic parts for repair and parts replacement.
4) After repair, reinstall all the safety covers that were detached during repair.
Do not operate without finger guard and safety devices. Before threading,
changing bobbin and needle, cleaning etc. switch off
main switch.
Injury may be caused by winding.
Be sure to turn off the power before cleaning, lubricating, adjusting or
repairing.
Advertisement
Table of Contents
