Table of Contents
Advertisement
4.3.3) Adjusting needle and hook
When a needle bar rises at the lowest point of a needle
bar, align the lower line which fits the applied needle to
the lower face of a needle bar bushing.
4.3.4) Threading a needle
Thread a needle after moving a thread take up lever to
the highest point, when holding a thread like
materials, and like ② for knitwear, general and thin
materials.
4.4) Thread
4.4.1) Holding Upper and lower thread
1) Hooking upper thread
Place the thread take up lever on the highest position, and
hold the thread by making it pass through major and
minor thread tension control ass'y as the same with the
picture.
DPX5
DPX17
Less than #22
① for thick
① For thick materials
Needle bar
lower bushing
DPX17
More than #22
② For general materials
17
Advertisement
Table of Contents
