Table of Contents
Advertisement
2.3) Machine
installation
CAUTION
M M a a c c h h i i n n e e O O p p e e r r a a t t i i o o n n
2.4)
WARNING
Wrong machine Installation may cause malfunction & breakdown and other physical
damages so comply with what follows.
1) Workbench or table should be strong enough to hold machine weight (see face plate)
2) Implement regular check-up with Air Conditioner as dust and humidity cause
contamination and corrosion.
3) Keep machine out of direct sunlight. (Long exposure to direct sunlight is a source of
color change and deformation.)
4) Leave at least over 50cm space to left and right sides of machine to allow enough
repair space.
5) Explosion accident : To avoid explosion, stop operation when there is combustive
material in the air.
6) Work light: Lighting doesn't come with machine so that lighting should be separately
installed for machine operation.
7) Subversion danger : Don't place machine at an unstable stand or table which will
give serious shock to people and machine if it falls down. Sudden stop while moving
machine or exterior shock may cause subversion.
SPS/S-CV1 is manufactured to sew textile and its similar texture. Machine body has
caution and warning stickers at each danger part to call attention to safety indication,
which should be kept in mind and obey what follows in operating machine.
1) Read this manual and fully understand how to operate it before use.
2) Have safety outfit on. A long hair, a necklace, a bracelet or a wide sleeve may get
jammed into machine. Slip-proof shoes are also necessary.
3) Check operation scope in order for machine not to encounter obstacles in operation
4) Keep a hand or a head away from accident-vulnerable parts (needle, hook, thread
lever, pulley).
5) Don't remove safety cover protecting pulley or shaft for a user's safety while
operating.
6) When dismantle electric box including control box, make sure electricity is blocked
and power switch is "off".
7) When rotate upper shaft with hands, make sure power switch is "off".
8) Ensure that machine stops when thread a needle or until after-work check.
9) Failure to obey what follows will bring physical damages including malfunction &
breakdown. Comply with the following instruction.
- Don't place things on machine table.
- Don't use bent or end-damaged needle.
- Use palette suitable for work condition.
7
Advertisement
Table of Contents
