Reer Mosaic MI8 Installation And Use Manual page 161

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
Traces visibility: used to select the traces (signal waveforms) to be displayed in the
graph. When you press this key, it opens a pop-up window as shown in
which you can add or remove traces to or from the graph.

The traces that can be added to the graph are shown in the box on the left. The
traces currently displayed and which can be removed from the graph are shown in
the box on the right.
8540780 • 23/03/2017 • Rev.31
Figure 78 - Traces visibility.
Figure 78
from
161