Reer Mosaic MI8 Installation And Use Manual page 147

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC

Otherwise, a Warning is displayed in the compilation phase and in the report.

The user must adopt additional safety measures during the Override phase.
"With sensors
occupied " selected
X
-
Timeout (sec): Used to set the time, between 10 sec and infinity, by which the Override
function must end.
Override mode: Used to configure the type of Override (pulsed or maintained action).
With OverOut: Used to activate an Override active Signaling output (active when high).
With Request: Used to activate a Signaling output (active when high) indicating that the
Override function can be activated.
Manual Reset:

Should the INPUT be active (TRUE), the reset enables the output of the function
block.

Should the INPUT be not active (FALSE), the output of the function block follows the
OVERRIDE request.
There are two types of reset: Manual and Monitored. When Manual is selected the system
only verifies the signal's transition from 0 to 1. If Monitored is selected the double
transition from 0 to 1 and then back to 0 is verified.
8540780 • 23/03/2017 • Rev.31
Conditions to be checked for activation of Override
sensor
curtain
occupied
occupied
X
-
X
X
light
Override
Input
request
- 0
X 0
- 0
X 0
Override
output
1 1
1 1
1 1
1 1
147