Setting The Current Date And Time - Canon imageRUNNER ADVANCE C5051 Getting Started

Setting the Current Date and Time

Setting the current date and time is very important. The current date and time settings are used as standard timer settings for
functions that require them.
• GMT:
• Time Zone:
• Daylight Saving Time:
You can also specify to automatically synchronize the date and time with a server on the network from the Settings/Registration screen.
(See "TCP/IPv4 Settings, " on p. 4-3.)
1
Press
Settings] .
2
Enter the current date (day, month, year) and time using
13
Enter the day and the month using four digits (including zeros).
Enter all four digits of the year, and the time in 24-hour notation, as four digits (including zeros) without a space.
Examples:
If you make a mistake when entering values, press
● If you are setting the Time Zone:
☐
● If you are setting Daylight Saving Time:
☐
☐
☐
☐
If you set Daylight Saving Time, the machine automatically sets the standard time of the machine one hour forward at the specified
date and time.
3
Press [OK] .
13-4
Fax Settings
The time at the Greenwich Observatory in England is called GMT (Greenwich Mean
Time).
The standard time zones of the world are expressed globally in terms of the
difference in hours (up to 12 hours) from GMT (0 hours). A time zone is a region
throughout which this time difference is the same.
In some countries, time is advanced throughout the summer season. The period in
which this is applied is called "Daylight Saving Time."
(Settings/Registration) → [Preferences] → [Timer/Energy Settings] → [Date/Time
→
6 May 0605
→
7:05 a.m. 0705
→
11:18 p.m. 2318
Press the Time Zone drop-down list → select the time zone in which the machine is located.
Press [On] → [Start Date].
Select the month and day from the Month and Day drop-down lists, respectively.
Press [-] or [+] to enter the time of day you want Daylight Saving Time to take effect → press [OK].
Press [End Date] → select the month, day, and time at which Daylight Saving Time ends → press [OK].
- (numeric keys) .
(Clear)→ enter the values again, starting with the day.