Canon imageRUNNER ADVANCE C5051 Getting Started page 77

5
In <IPv4>, specify the following .
If you want to use dynamic DNS updating, enter the IPv4 address of the DNS server in [Primary DNS Server].
If you do not want to set up a secondary DNS server, enter <0.0.0.0>.
If you set [BOOTP] or [DHCP] to 'On' in step 3, the IP address of a DNS server you set manually will be overwritten.
6
On the DNS Settings screen, press [DNS Host/Domain Name Settings] → in <IPv4>, specify the
following .
Enter the name of the machine as [Host Name], and the network domain name of the machine as [Domain Name].
If you want to use dynamic DNS updating, it is necessary to set a host name and domain name.
If you set [BOOTP] or [DHCP] to 'On' in step 3, the host name and domain name you set manually will be overwritten.
4-5
Protocol Settings
4