Settings Required Prior To Remote Scanning - Canon imageRUNNER ADVANCE C5051 Getting Started

Settings Required Prior to Remote Scanning

Once you have installed the scanner driver, the following settings are required in order to perform remote scanning.
For details about this procedure, see the Network ScanGear Installation Guide.
■ Switching the Scanner Online and Offline
In order to start the scanner driver and scan, the scanner must be set to [Online] beforehand at the device.
When the scanner is online, communication with devices connected over a network is possible and the scanner can receive data from
computers.
■ Selecting the Network Scanner You Want to Use
In order to scan using Color Network ScanGear, select the device on the network that you want to use as a scanner using the ScanGear
Tool. Because a scanner is not selected immediately after installation, this operation must be performed before use.
The ScanGear Tool is software that is installed together with Color Network ScanGear.
16
16-4

Settings Required Prior to Remote Scanning