Before Starting Sms (Preparations); Specifying The Ssl Settings - Canon imageRUNNER ADVANCE C5051 Getting Started

Before Starting SMS (Preparations)

Before logging in to the SMS, an administrator must start the machine and perform the following procedure:
■ Specify the Network Settings
Specify the settings under [Network] in [Preferences] (Settings/Registration) and find out the machine's IP address.
(See "Protocol Settings, " on p. 4-3.)
■ Specify the SSL Settings
Set [SSL Settings] to 'On' in [MEAP Settings] in [License/Other] in [Management Settings] (Settings/Registration). If it is not set to 'On' , you
cannot log in to SMS.
■ Enable Access to the Machine from the Web Browser
Set [Use HTTP] to 'On' in [TCP/IP Settings] in [Network] in Preferences (Settings/Registration). If it is not set to 'On' , you cannot access the
machine from the Web browser.
•
You cannot connect to the machine via a proxy server. Specify the following settings if you are working in an environment using a proxy
server (as these settings differ depending on the network environment, consult the administrator for the network you are using.).
- In the proxy server settings of your web browser, add the IP address of the machine to the [Exceptions] (addresses that do not use a
proxy) list.
•
8
You cannot use SMS if your web browser is not set to enable cookies and JavaScript.
•
When entering characters from your web browser, use characters that can be entered from the touch panel display of the machine.
Otherwise, the characters may not be displayed or recognized correctly on the touch panel display.

Specifying the SSL Settings

To use SMS, it is necessary to use SSL communication.
The default setting is 'Off' .
1
Press
2
Press [License/Other] → [MEAP Settings] → [SSL Settings] .
8-6

Before Starting SMS (Preparations)

(Settings/Registration) → [Management Settings] .