Select A Safe Power Supply; Moving The Machine - Canon imageRUNNER ADVANCE C5051 Getting Started

Select a Safe Power Supply

■ Plug the machine into a 220 - 240 V AC outlet .
Make sure that the power supply for the machine is safe, and has a steady voltage .
■
■ Do not connect other electrical equipment to the same power outlet to which the machine is
connected .
1
■ Do not connect the power cord to a multiplug power strip, as this may cause a fire or electrical shock .
■ The power cord may become damaged if it is stepped on, affixed with staples, or if heavy objects are
placed on it . Continued use of a damaged power cord can lead to an accident, such as a fire or electrical
shock .
■ The power cord should not be taut, as this may lead to a loose connection and cause overheating,
which could result in a fire .
■ If excessive stress is applied to the connection part of the power cord, it may damage the power cord or
the wires inside the machine may disconnect . This could result in a fire . Avoid the following situations:
•
Connecting and disconnecting the power cord frequently.
•
Tripping over the power cord.
•
The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part.
•
Applying excessive force on the power plug.

Moving the Machine

■ If you intend to move the machine, even to a location on the same floor of your building, contact your
local authorized Canon dealer beforehand . Do not attempt to move the machine yourself .
1-4
Installation Location and Handling