Canon imageRUNNER ADVANCE C5051 Getting Started page 25

•
Turn OFF the control panel power switch for safety when the machine will not be used for a long period of time, such as
overnight . Also, turn OFF the main power switch, and disconnect the power cord for safety when the machine will not be used
for an extended period of time, such as during consecutive holidays .
•
Do not place your hands, hair, clothing, etc ., near the exit and feed rollers . Even if the machine is not in operation, your hands,
hair, or clothing may get caught in the rollers, which may result in personal injury or damage if the machine suddenly starts
printing .
•
Do not place your hands in the part of the tray where stapling is performed (near the rollers) when a finisher is attached, as
this may result in personal injury .
Inner Finisher-A1
•
The laser beam can be harmful to human bodies . Since radiation emitted inside the product is completely confined within
protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation .
Read the following remarks and instructions for safety .
•
Never open covers other than those instructed in the manuals for this machine .
•
Do not remove the following caution label which is attached to the machine . If the label has been removed, contact your local
authorized Canon dealer .
•
If the laser beam escapes from the machine, exposure may cause serious damage to your eyes .
•
Controlling, adjusting, or operating the machine in ways not mentioned in the manuals for this machine may cause
dangerous radiation to escape from the machine .
Staple Finisher-C1/Booklet Finisher-C1
xxiii