Interface Settings
This section describes how to specify the interface settings from the control panel. If you are configuring the settings for the
first time, use the control panel of the machine.
After configuring the settings, you can change them using software other than the control panel of the machine. For details,
see e-Manual > Settings/Registration.
1
On the Network screen, press [Confirm Network Connection Set . Changes] → specify the
following .
3
[On]: If errors related to network connections occur, an error message is displayed on the touch panel display of the machine. If you
want to use the machine in a network environment, select [On].
[Off ]: Messages related to network connections are no longer displayed. If you want to use the machine without connecting to a
network, select [Off ].
Even if you switch the [Confirm Network Connection Set. Changes] setting from 'On' to 'Off' , if the network connections are
correctly set they will not be disconnected. The settings in the Network screen will not be changed.
3-6
Interface Settings