Table of Contents
Advertisement
1 IMPORTANT SAFETY INSTRUCTIONS
Save These Instructions
This manual contains important instructions that must be closely followed during installation of this unit
to maintain compliance with agency listings. Read all safety and operating instructions. Adhere to all
warnings on the unit and in this manual. Follow all operating and user instructions.
WARNING: Risk of handling heavy unit. Can cause equipment damage, injury or death. Read all
instruction before beginning.
WARNING: Risk of top-heavy unit falling over. Improper handling can cause equipment damage, injury
or death. Only properly trained and qualified personnel wearing appropriate safety headgear, gloves,
shoes and glasses should attempt to move, lift, remove packaging from or prepare unit for installation.
Read all instructions before attempting to move, lift, remove packaging from or preparing unit for
installation.
This product is designed for commercial / industrial use only. This product is not intended for use with life
support or other U.S. FDA designated "critical" devices. Maximum loads must not exceed those specified in
this manual. The maximum load rating for the DCF is found in the DCF quide specficiation SL-11392. Do
not exceed the static load rating.
Install and operate in a clean environment, free from moisture, flammable liquids, gases and corrosive
substances. The DCF must be installed on a flat, level surface for proper assembly and operation.
Ensure that the DCF has proper ventilation. Never block or insert objects into the ventilation holes or
other openings. Maintain minimum clearances as specified in this manual.
Provide the minimum spacing between the accessories/components and the housing that shall be
maintained for safe operation of the equipment when installed in accordance with the National Electric
Code, ANSI/NFPA 70.As appropriate, all wiring and equipment should be installed in accordance with
NFPA 70, "National Electrical Code," and the applicable sections of ANSI C2, "National Electrical Safety
Code."
We recommend that casters only be used to move empty cabinets.
Vertiv | DCF Installer/User Guide |
5
Advertisement
Table of Contents
