About - Ametek iPac User Manual

Instrument Setup
iPac Menu Options
Bluetooth
(continued)
Detectable
The Detectable mode sets the iPac in a mode that allows
communication with a Bluetooth compatible computer. When this
mode is selected, the green color is set ON and the iPac is available
to connect to a computer, however, the connection must be
established by the computer to enable the transfer of data.
The iPac's Bluetooth passkey is shown at the bottom of the display when the
Detectable mode is active The computer may request this passkey code when
attempting to connect to the iPac.
Note: The iPac can only have one active Bluetooth connection at a time. If a
SEARCH is performed while DETECTABLE mode is active, the DETECT-
ABLE mode will be turned OFF and any Bluetooth connection with the com-
puter will be lost. If DETECTABLE is activated while the iPac has a Bluetooth
connection to a printer, the printer connection will be lost.
After the computer connection is established, the iPac can send data to the computer
using the PRINT command. Please contact your EMR/EHR
software provider, so that they can help configure your system to
allow Bluetooth connectivity.

About

The About screen displays the following information:
• Serial - displays the serial number of the unit.
• Revision - Provides the revision of the operating software of the iPac.
18
(continued)
(continued)
16040-101 Rev. J