Ametek iPac User Manual page 22

Instrument Operation
(continued)
Measurement Screen
(continued)
Asterisks
Asterisks
When the instrument is ready to take measurements, three asterisks
(***) are displayed on the screen. After five or more measurements
are acquired the asterisks will change and display the average value.
The number of measurements are displayed below the asterisks
(e.g., 6/25). If it is difficult to get measurements from a patient, fewer
than 25 measurements can be taken, the average will be based on
the fewer measurements.
Clearing Data
To clear data on the display, move the Control button up ( ) for
about 2 seconds, until the display indicates that the measurements
have been cleared.
22 16040-101 Rev. J