Ipac Bluetooth Printer - Ametek iPac User Manual

Instrument Operation

iPac Bluetooth Printer

5. Exit the iPac setup mode.
6. The iPac is now connected to the iPac printer, to send measurement data to the
printer after measuring a patient, move the Control button down (
will be sent to the iPac printer and printed. A sample printout is shown below.
Note: If the printer fails to print, check that the printer is turned on, green LED
illuminated and ensure that the Bluetooth icon on the iPac display shows it is
connected.
Note: When a connection is made to a Bluetooth printer, the connection information
is stored in the iPac. Whenever Bluetooth is turned on and no other connec-
tions have been made, the iPac will attempt to reconnect to the same printer.
16040-101 Rev. J
(continued)
(continued)
), the data
27