Cleaning And Disinfection; Ipac Cleaning Instructions; Measurement Tip Cleaning Instructions - Ametek iPac User Manual

Cleaning and Disinfection

iPac Cleaning Instructions

Perform the following procedure when cleaning the outside of the iPac Pachymeter.
CAUTION: DO NOT IMMERSE THE INSTRUMENT IN LIQUIDS OR AUTOCLAVE OR DAM-
AGE TO THE ELECTRONICS OF THE PACHYMETER WILL OCCUR.
1. After using the iPac Pachymeter, we recommend wiping the outside of the
instrument with a soft, cotton cloth lightly moistened with 70% isopropyl alcohol.
2. After cleaning, wipe the outside of the instrument with a soft, cotton cloth lightly
moistened with sterile distilled water.
3. Dry the unit with a lint free cloth or tissue.
Note: Always store the pachymeter in its case when not being used for an extended
period of time.

Measurement Tip Cleaning Instructions

Perform the following procedure when cleaning and disinfecting the iPac measurement tip.
WARNING: DO NOT ATTEMPT TO USE THE IPAC IF THERE IS ANY INDICATION THE
MEASUREMENT TIP HAS BEEN DAMAGED AND/OR THEIR PHYSICAL INTEGRITY
HAS BEEN COMPROMISED. IF THE MEASUREMENT TIP HAS MADE CONTACT WITH
ANYTHING BETWEEN APPLANATIONS, CLEAN THE TIP ACCORDING TO THE MEA-
SUREMENT TIP CLEANING INSTRUCTIONS OR SERIOUS INJURY MAY OCCUR.
1. After each patient, we recommend wiping the measurement tip with a cotton
swab soaked in 70% isopropyl alcohol.
CAUTION: DO NOT IMMERSE THE INSTRUMENT IN LIQUIDS EXCEPT FOR ONLY THE
MEASUREMENT TIP OF THE PACHYMETER OR DAMAGE TO THE ELECTRONICS OF
THE PACHYMETER WILL OCCUR.
2. Immerse only the measurement tip for 10 minutes in 70% isopropyl alcohol or an
equivalent locally approved disinfectant.
3. After cleaning, rinse the end of the measurement tip thoroughly with sterile
distilled water.
4. Dry the measurement tip with a lint free cloth or tissue.
Note: Always store the pachymeter in its case when not being used for an extended
period of time.
28 16040-101 Rev. J