Table of Contents
Advertisement
5-i nch High Speed Dome User Ma nual
2. Move the cursor to DISPLAY SETTINGS using the direction buttons and click IRIS+ to enter.
3. Move the cursor to the target item and click IRIS+ and click up/down direction buttons to
choose each display mode as ON or OFF, and define each display time as 2 seconds, 5 seconds
or 10 seconds.
4. Click IRIS+ button to confirm.
Note:
If you enabled the OSD for both ZOOM and PT, while calling a preset, the preset label will be
displayed on the screen until the preset finishes.
Display the viewing Direction.
The speed dome shows the viewing direction when you are manually controlling it to rotate.
Display
N
Indication North Northeast
Note:
The north direction refers to the 0ºangle (initial position).
3.4 Configuring PTZ Control Parameters
Purpose:
You can configure pan, tilt and zoom movements, and configure PTZ control functions including
presets, patrols, patrols, etc. for the high speed dome.
3.4.1 Configuring PTZ Parameters
Enter PTZ configuration menu:
MAIN MENU > DOME SETTINGS > MOTION PARAMETER
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
DISPLAY SETTINGS
ZOOM SHOW
PT SHOW
ALARM SHOW
ON
TIME SHOW
ON
PRESET SHOW
ON
ZONE SHOW
ON
BACK
EXIT
Figure 3-10
Viewing Direction Display
Table 3-1
NE
E
East
DISPLAY SETTINGS
2
ADDRESS SHOW
2
ERROR RATE SHOW
BACK
Display Settings
SE
S
Southeast
South
OFF
OFF
EXIT
SW
W
Southwest
West
16
NW
Northwest
Advertisement
Table of Contents
