Table of Contents
Advertisement
5-i nch High Speed Dome User Ma nual
3.3.3 Configuring Privacy Mask
Purpose:
Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the
surveillance area from being live viewed and recorded. The masked areas can move with the pan/tilt
movements and automatically adjust the size as the lens zooming in/out.
Steps:
1. Move the cursor to enter the privacy mask configuration submenu:
MAIN MENU > DOME SETTINGS > PRIVACYS
2. Choose the privacy mask number.
Steps:
(1) Move the cursor to BLANK NUM and click IRIS+ button to enter edit mode.
(2) Click the up and down direction buttons to select the number of the pattern which is to be
configured.
(3) Click IRIS+ again to confirm and exit edit mode of this column.
Note:
The configurable privacy mask numbers vary depending on the camera models.
3. Configure the position and size of the privacy mask.
Steps:
(1) Move the cursor to SET BLANK and click IRIS+ button to enter edit mode. You will see a
purple privacy mask on the live window.
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
PRIVACY BLANKS
BLANK NUM
BLANK STATUS
SET BLANK
CLEAR BLANK
BACK
Privacy Mask Configuration Menu
Figure 3-6
ADJUST BLANK POS
FOCUS SHIFT STATUS
SAVE: OPEN
QUIT: CLOSE
Set the Privacy Mask
Figure 3-7
1
OFF
EXIT
13
Advertisement
Table of Contents
