HIKVISION DS-2AF1-764 User Manual page 25

5-i nch High Speed Dome User Ma nual
2. Choose the preset number.
Move the cursor to PRESET NUM and click IRIS+ to enter. Click the up and down buttons to
choose the preset number which needs to be edited. If the preset has been defined, the preset
label will be listed under the number; if it has not been defined, you will see UNDEFINED under
the number.
Notes:
 There are up to 254 presets can be set for the speed dome.
 The system-defined presets will be displayed on this submenu and they are not editable.
3. Edit the label of the preset.
Steps:
(1) Move the cursor to EDIT LABLE and click IRIS+ to enter the edit mode.
(2) Click FOCUS IN in the PTZ control panel to switch between the character lists, including
capital alphabet, lowercase alphabet, symbols and numbers; click the up/down and
left/right direction buttons to move the cursor to choose a specific character to input.
(3) Click FOCUS OUT to position the cursor on the label where the character needs to be
modified. Click ZOOM IN to delete it.
(4) Click IRIS+ to inset the selected character from the letter/number/symbol list to the label.
(5) Click FOCUS IN to exit the character lists and click IRIS+ again to confirm and exit the
submenu.
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
PRESETS
PRESET NUM
[UNDEFINED]
<EDIT LABEL>
PRESET PTZ
CLEAR PRESET
BACK
Preset Configuration Menu
Figure 3-12
LABLE [PRESET 1 ]
INS
ZOOM+DELETE CONTENTS
FOCUS+CHANGE CONTENTS
FOCUS-CHANGE MARKER
ROCKER CHOOSE CONTENTS
OPEN: SURE CLOSE: BACK
Edit the Preset Label(1)
Figure 3-13
1
EXIT
19