5-i nch High Speed Dome User Ma nual
Chapter 3 Menu Operation
Before you start:
You can operate the high speed dome using the on-screen display menu remotely by connecting to
a DVR or a DVS (encoder). Menu operations via the IE browser of a DVR will be taken as an example
in this chapter.
3.1 Accessing and Operating the Menu
To enter the main menu:
Connect the speed dome to a DVR and visit the DVR through an IE browser. For PELCO-P/D and
other private PTZ protocols, call preset 95 from the preset list of the DVR; for some other protocols,
e.g. Manchester code control protocol, call preset 66 to access the menu. Please refer to Table 2-3
for details.
To move the cursor and operate the menu:
Move the cursor up/down: On the IE browser live view page of the DVR, click up and down
direction buttons or FOCUS IN and FOCUS OUT buttons in the PTZ control panel to move the
cursor up and down.
Enter/Exit: On the IE browser live view page of the DVR, click IRIS+ to enter a submenu; move
the cursor to Exit and click IRIS+ to exit.
To change the value of a parameter:
Steps:
1. Move the cursor to the target item and click IRIS+ button and you can see the cursor (diamond
mark) will change to be hollow.
2. Click the up/down or left/right buttons in the PTZ control panel to choose the value from the
selectable list.
3. Press IRIS+ to confirm the change or click IRIS- to cancel and restore the original value. The
diamond mark will change back to be stuffed.
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
MAIN MENUS
<SYS INFO>
<DOME SETTINGS>
<RESTORE DEFAULTS>
<RESTORE CAMERA>
<REBOOT DOME>
LANGUAGE
ENGLISH
SET TITLE
OFF
EXIT
Main Menu
Figure 3-1
5