Table of Contents
Advertisement
5-i nch High Speed Dome User Ma nual
4. Set the preset position.
Move the cursor to PRESET PTZ and click IRIS+ to edit the preset position. Use the direction
buttons to move the speed dome to find the desired scene/position, and then press IRIS+ to
confirm the settings and return to the previous menu, or press IRIS- to cancel.
Note:
The preset position settings will be restricted by the limit stops if they are defined.
5. Call the defined preset.
You can select the preset number from the drop-down preset list in the control panel of the DVR
through a web browser, and click the arrow to call a user-defined or system-defined preset.
6. Clear the preset settings.
Move the cursor to CLEAR PRESET and click IRIS+ to clear the settings of the current preset.
3.4.3 Configuring Patrols
Purpose:
A patrol is a series of dome scanning between the preset positions. You can call a patrol to scan the
scenes automatically among a group of configured presets in sequence.
Steps:
1. Move the cursor to enter patrol configuration submenu:
MAIN MENU > DOME SETTINGS > PATROLS
2. Choose the patrol number.
Steps:
(1) Move the cursor to PATROLS NUM and click IRIS+ to enter edit mode.
(2) Click the up and down direction buttons to select the number of the patrol which is to be
configured.
(3) Click IRIS+ again to confirm and exit edit mode of this column.
Note:
You can configure up to 8 patrols.
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
LABEL
[PRESET 1 ]
INS
LOWCASE[a b c d e f g h I j]
ZOOM+DELETE CONTENTS
FOCUS+CHANGE CONTENTS
FOCUS-CHANGE MARKER
ROCKER CHOOSE CONTENTS
OPEN: SURE CLOSE: BACK
Edit the Preset Label(2)
Figure 3-14
20
Advertisement
Table of Contents
