Table of Contents
Advertisement
5-i nch High Speed Dome User Ma nual
(2) You can see ADJUST BLANK POS message on the screen. Click the direction buttons to adjust
the position of the privacy mask to the designed scene.
(3) Click FOCUS IN button, and you will see ADJUST BLANK SIZE message on the screen. Click
the up/down buttons to increase/decrease the height of the mask and click right/left
buttons to increase/decrease the width of the mask. Click IRIS+ button to save the settings
and return to the previous menu and you can see the mask turn to gray.
(4) To modify the configured mask, click IRIS+ button to enter the SET BLANK menu and click
IRIS+ button again to modify.
Note:
The tilt range for configuring the privacy masks is from 0~70°; after configured the privacy
mask, the speed dome can be only tilting in the range of 0~90°.
4. Set the privacy mask status.
Enter the BLANK STATUS submenu and click the up and down direction buttons to set it ON or
OFF.
Note:
If no privacy mask has been configured, you cannot set the status as ON. If the privacy
mask is configured, the status will be set as ON automatically.
5. Delete the privacy mask.
Enter the CLEAR BLANK menu to delete the current privacy mask.
3.3.4 Configuring OSD Settings
Purpose:
You can configure the on-screen display of the dome name, PTZ control information, azimuth
viewing angle, etc.
Display the dome title
Steps:
1. Enter the dome title setting menu:
MAIN MENU > SET TITLE
2. Click IRIS+ to set it to ON and click again to confirm.
3. On the live view screen, call preset 11 twice within 5 seconds to enter the SET TITLE menu, as
shown in Figure 3-8.
4. Click the left/right direction buttons to position the cursor to the characters of the title.
5. Get the codes for a specific character and enter each code (number) by calling the preset
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
TITLE
CODE
TITLE
BACK
EXIT
Set Dome Title
Figure 3-8
14
Advertisement
Table of Contents
