Configuring Presets - HIKVISION DS-2AF1-764 User Manual

5-i nch High Speed Dome User Ma nual
 PTZ speed
Purpose:
You can define the speed of the dome movements.
(1) DOME SPEED: the manual movement speed can be set as HIGH, MID or LOW.
(2) SCAN SPEED: scan speed defines the scan degree per second of panning scan, tilting scan, frame
scan, random scan and panoramic scan. Scan speed is adjustable from 1 to 40 degrees per
second.
(3) PRESET SPEED: the speed of calling a preset can be set from level 1 to 8. The higher level
corresponds to the faster speed to call a preset.
 Limit stops
Purpose:
Limit stops are the user-configurable stops which limit the panning and tilting area of the speed
dome. There are left, right, up and down limit stops to define an area.
Steps:
1. Move the cursor to LIMIT STOPS and click IRIS+ to set it ON to enable this feature. Click IRIS+
again to confirm.
2. Move the cursor to SETTING LIMIT STOPS and click IRIS+. You will see the message SET LEFT
LIMIT on the screen.
3. Click the direction buttons in the PTZ panel to configure the left limit stop. Click IRIS+ to confirm.
4. Follow the prompts to configure the right, up and down limit stops on the menu.
Note: The new limit stops will overwrite the existed ones by default.
5. You can clear the defined limit stops. Click IRIS+ to enter CLEAR STOPS and click IRIS+ again to
clear the stops.
 Elevation angle
You can enable the elevation angle of the speed dome. You can set ELEVATION SET as ON or OFF.

3.4.2 Configuring Presets

Purpose:
A preset is a user-defined monitor position/point. You can simply call the preset number to change
the monitor scene to the defined position.
Steps:
1. Move the cursor to enter preset configuration submenu:
MAIN MENU > DOME SETTINGS > PRESETS
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
18